Question: What Is A Plantronics Lifter?

What is EHS adapter for Jabra engage 75?

Includes Jabra Cisco EHS adapter for remote answering Jabra Engage 75 Mono includes headband and neckband.

Noise-cancelling microphone.

Connect up to 5 devices (allow 2 USB devices, 2 Bluetooth device and 1 analog desk phone..

What does a handset lifter do?

An automatic handset lifter is a electronic device that gives you the ability to answer your telephone call away from your phone. You will first need to purchase or already have a Plantronics or Jabra/GN Netcom wireless headset. … The lifter only lifts the handset.

How do you answer a Plantronics Voyager Legend?

The Voyager Legend allows you to answer a call by using one of three methods: putting on the headset, saying “Answer” after the caller is announced, or pressing the call button.

How do I connect my Plantronics headset to my desk phone?

Press and hold the call control button for 5 or 6 seconds until the light starts flashing an alternating red-blue. Release the button and set the headset aside. 2. Follow the pairing instructions for your cell phone or other Bluetooth device.

What headsets work with Polycom phones?

Wireless Headsets: Both Plantronics and Jabra/GN Netcom wireless headsets are compatible with Polycom IP phones. For remote answering on the Polycom IP phones you need a Plantronics HL10 Lifter + Plantronics Lifter Accessory for Polycom IP Phones.

How do I make calls from my Plantronics headset?

You will need to pick up the handset receiver and set it to the side of your phone, then push the call control button on your headset. This will transfer the dial tone to the headset. So as you can see you must be at your desk to answer the incoming call or when making an outbound call.

How do I know which Plantronics headset I have?

You will find the serial number on the inner part of one of the speakers of the headset, if possible, remove the ear cushions/tips to locate it.

How do I connect my Plantronics wireless headset to my phone?

Start with your headset powered on.Press and hold the call control button for 5 or 6 seconds until the light starts flashing red and blue (some models flash red and white).Release the button and set the headset aside.Follow the pairing instructions for your cell phone or other Bluetooth device.More items…•

What is Hookswitch mode?

Headset Memory Mode allows all incoming and outgoing calls to go through your headset. Electronic Hookswitch (EHS) is a feature that allows users to start and end calls by pressing buttons on their headset.

How do you answer a Plantronics headset?

Take this action:Press the headset call button when you hear an incoming call.Press the button on the base for the line that is ringing. Note that if you don’t have remote call control through a lifter (HL10) or cable (EHS), you’ll have to manually remove the desk phone handset before each call.

What is an EHS adapter?

Electronic Hookswitch (EHS) adapters provide a ring alert signal to your headset anytime your deskphone rings. It also allows you to answer and end calls right from your headset anywhere within your headset’s range. EHS adapters eliminate the need for an HL10 handset lifter.

What is EHS on phone?

An electronic hook switch is a device which electronically connects a wireless headset and phone. An EHS passes predefined signalling. Either bluetooth headset or DECT headset can be used. Users can handle calls with the headset only, freeing them from remaining next to the phone.

What does an EHS cable do?

Electronic Hook Switch Cables (EHS) provide remote desk phone call control (answer/end) with your Plantronics wireless headset system (or the MDA200™ headset hub). … We also have a handset lifter accessory that can be used with most desk phones that are not compatible with one of our EHS cables.