Question: Where Is The Reset Button On FiOS Box?

Why is my Verizon cable box not working?

Troubleshoot FiOS TV Press the power button for 15 seconds or unplug the power cord from the equipment for 10 seconds; then plug it back in.

Do this for each of your Set-Top Boxes.

Even if you are not currently using the Internet, your router must be turned on for FiOS TV to function properly..

Why is my TV not responding to my remote?

A remote control that will not respond or control your TV usually means low batteries. Make sure you are pointing the remote at the TV. There also may be something interfering with the signal such as other electronics, certain types of lighting, or something blocking the TV remote sensor.

How do I get my FiOS remote to control my TV?

How to program your remote controlTurn on your TV and Fios Set-top box.Press and hold TV key for 6 seconds. Each device key will light up, then the TV key will remain on.Press the Power button on your remote. … Press the Up arrow button once every second until the TV turns off.Press OK to store the code in your remote.

What to do if setup box is not working?

My set top box won’t switch onCheck your cables. Check the power cable is securely connected to your set top box. Perform the same check at the wall socket and ensure it is switched on. … Try another electrical socket. Unplug the set top box and connect it in to another socket. … Test other electrical applicances. Check if the lights in your room are working.

How do I reset my cable box?

To reset your cable box, simply unplug it from the wall outlet. Wait about 30 seconds, then plug it back in and allow the box to go through the reboot process, which should take about three minutes.

Why did my cable box stop working?

Turn off the Set-Top Box by either using your remote control or by pressing the POWER button on the box. Carefully unplug the Set-Top Box power cord from the electrical outlet or power strip if you’re using one. … Plug the power cord back in. The Set-Top Box will automatically reboot – this may take a few minutes.

How do I reset my FiOS remote control?

Press the OK and FiOS TV buttons at the same time. Release both buttons and the red light on the remote will blink twice and stay on. Next, press and release the Play/Pause button once every second until the remote finds the right code and your TV shuts off. When the TV shuts off, stop pressing the Play/Pause button.

Why is my FIOS remote not working?

Open the battery cover and make sure the batteries are properly seated. Press a few device buttons like AUX, DVD, STB, TV. If the top of your remote flashes briefly, the batteries are working. If the top of the remote does not flash, your batteries need to be replaced.

How do I get my FIOS remote to control my TV input?

The TV input control automatically changes the input source to your Fios® TV set-top box when you press the STB button on your Fios remote or set-top box….Press Menu button.Navigate down and select System or Settings.Navigate down and select CEC.Press OK on CEC and select On.

How do I fix my set top box on my TV?

Please follow the steps below.Connection via HDMI cable. 1) Connect the Set-Top Box to the TV using an HDMI connector cable. 2) Connect the antenna cable to the antenna input of the Set-Top Box. … Connection via antenna cable. 1) Connect the antenna cable to the antenna input of the Set-Top Box. … Other possible connections.

How do I reset my set top box remote?

1. Press and hold OK and number 1 button on your Dish TV or Videocon D2H universal remote for a few seconds. It’ll reset the universal remote to factory settings.

What do you do if your TV remote doesn’t work?

To determine which of these conditions is causing your problem, follow these steps:Open the battery compartment on the back of the remote and remove both batteries.Press and hold any button on the remote for 20 Seconds.Release the button and reinsert the batteries properly.More items…•

How do I get my remote to work on my TV?

How to Connect a Remote to a TVHold down the program button on the remote control for 3 seconds. This button mighty be displayed on the remote as “PRG.” When you have done this, the LED light on the remote control will turn on. … Press the “TV” button on the remote control to let the remote know it will be syncing with a TV.

How do I know if my cable box is bad?

How Can I Tell If I Have a Bad Cable Box?Ensure your box and television are receiving power. … Test your television to make sure a lack of picture isn’t because the television isn’t working. … Check all connections between the television and cable box. … Tune in the television to the correct channel if using a coax line. … Turn on the cable box.More items…

Why is my set top box not working?

CAUSE: The first and most common cause for set top box not working is improper cable connections. SOLUTION: Make sure all the cables are connected in the right ports and none of the connections are broken or obstructed.